Lcd Display; Target Readout - Bounty Hunter Time Ranger Owenrs Manual

Touch pads (continued)

LCD Display

The LCD display consists of the TARGET readout and both adjustment
and indicator dials. Arrows also appear at the top of the LCD display,
pointing to the probable target detected in the Probable Target ID fields.

TARGET Readout

The TARGET readout displays general detector operating information. It
appears in the top center of the LCD display between the SENSITIVITY
and DEPTH dials. The following table lists the general operating
abbreviations that appear under TARGET, their meaning, and a brief
description of each.
TARGET
Ac Accept
Ar Air Value
gb Ground
Balance
rY Discriminate Mode
288 ID Numbers
0-299
LOW and HIGH are used to adjust the detector's
sensitivity in DISCRIMINATION mode. LOW and
HIGH are used to adjust the detector's AUDIO
LEVEL in ALL METAL mode.
TARGET Readout
Meaning Description
Appears when you press + using the +/-
TARGET touch pads. Indicates that the
target has been accepted.
Indicates the detector is testing the air.
Indicates the unit has taken ground
measurements and averaged them.
Mode Indicates the detector is ready for
operation in ALL METAL mode.
Indicate air and ground measurements
and target value range for more detailed
target identification.
10