Bounty Hunter Time Ranger Owenrs Manual page 20

4. Press REJECT three times to select IR3.
IR3 appears in the TARGET readout.
5. Press REJECT four times to select IR4.
IR4 appears in the TARGET readout.
6. Press ACCEPT after your selection to "lock-in" the iron discrimination
level.
The level of iron discrimination you selected appears in the
TARGET readout, an R appears under IRON/FOIL, and the
blinking arrow appears under 5¢ as shown in the following
example.
7. Press REJECT or ACCEPT, depending on whether you want to
accept or reject the 5¢ targets.
NOTE:
Normally, you want to accept the 5¢ targets because many
gold items are detected as such.
The blinking arrow appears under PULL TAB.
8. Depending on how you want to customize your targets, continue
pressing ACCEPT or REJECT as the blinking arrow appears in the
remaining Probable Target ID fields.
TIP:
To accept the remaining targets and "lock-in" your
selection(s), you can press DISC TARGET at any time.
17
R
POWER
SNIFF
ON/OFF
ALL METAL
SMART
TRAC
DISC
PRESET
TARGET
BLANKER