Table of Contents
Advertisement
ACCESSORIES
Bounty Hunter
Carry Bag
®
Rugged double-stitched construction. – CBAG2
Bounty Hunter
Pouch & Digger Combo
®
Pouch with 2 large pockets & 9" heavy duty digging tool. – TP-KIT-W
Pinpointer
Pinpoints the exact location of buried metal objects. Audio signal indicator
and vibrator. Runs on (1) 9-Volt Alkaline battery. – PIN POINTER-W
Bounty Hunter
Sand Scoop
®
Large scoop with filtering holes. Made of strong plastic. – SAND SCOOPBH
Replacement/Accessory Searchcoils
8" Concentric Open Face Accessory
Coil – 8COIL-7B13
10" Concentric Replacement Coil – 10COIL-BH
11" Biaxial Standard Coil – 11COIL-BH
Coil Covers
Protect your coil from abrasion and damage.
8" Concentric Open Face Accessory Coil Cover – 8COVER-7
10" Concentric Coil Cover – F70COVER
11" Biaxial Standard Coil Cover – COVER-11DD
9" Heavy-Duty Digging Tool
Metal blade with comfortable plastic handle and depth gauge. – TROWEL-2
Digging Tool
Light and practical plastic, wide blade digging tool. – TROWEL-W
Rain Cover
Custom made to protect from weather. – RAINCOV-ET
Bounty Hunter
Baseball Cap
®
One size fits all, with Bounty Hunter
logo. – BHCAP
®
Bounty Hunter
T-Shirt
®
100% cotton with Bounty Hunter
Logo.
®
Sizes: S, M, LG, XL & XXL – BHTSHIRT
Gold
Prospecting Kits
FOR COMPLETE DETAILS VISIT WWW.DETECTING.COM • 1-800-413-4131
MLRPRO
070114
METAL DETECTOR
OWNER'S MANUAL
Use 9-volt
ALKALINE batteries.
Do not use
"Heavy Duty" batteries.
Do not use
ordinary "Zinc Carbon" batteries.
Advertisement
Table of Contents
Related Manuals for Bounty Hunter Land Ranger PRO
Summary of Contents for Bounty Hunter Land Ranger PRO
- Page 1 Light and practical plastic, wide blade digging tool. – TROWEL-W Rain Cover Custom made to protect from weather. – RAINCOV-ET Bounty Hunter Baseball Cap ® One size fits all, with Bounty Hunter logo. – BHCAP ® Bounty Hunter T-Shirt ®...
-
Page 2: Table Of Contents
• Respect private property and do not enter private property without the owner’s permission. Pro Metal Detector. The Land Ranger Pro is the result of nine years of software • Take care to refill all holes and leave no damage. -
Page 3: Terminology
TERMINOLOGY TROUBLESHOOTING GUIDE SYMPTOM CAUSE SOLUTION The following terms are used throughout the manual, and are standard terminology among detectorists. Detector chatters, • Using detector • Use detector beeps erratically indoors outdoors only RELIC or has low • Using detector near •... -
Page 4: Contents
CONTENTS OF BOX DEPTH AND TARGET DISPLAY Please refer to the display on your as a nail, or a more valuable historic iron The following detector components are in the box: detector and reference the TARGET-ID relic. categories below applicable to your FOIL: Aluminum foil, such as a gum model (not all detectors include all of 1. -
Page 5: Ground Balancing
GROUND BALANCING ASSEMBLING THE DETECTOR MANUAL GROUND ADJUSTMENT Hold S-ROD upright. Loosen LOCKING COLLAR on S-ROD; GROUND Refer to the section of the manual for instructions on how to manually rotate counterclockwise. adjust the detector’s internal Ground setting. Insert LOWER STEM into S-ROD with the If the Ground setting is incorrect, there will be a difference in the sound as SILVER BUTTON pointed upward. -
Page 6: Batteries (Use Alkaline Batteries Only)
BATTERIES GROUND CANCELATION WHAT IS GROUND CANCELATION? The detector requires a single 9-volt ALKALINE battery (battery not included). Do not use ordinary “Zinc Carbon” batteries Why do I need to cancel out the ground? Do not use “Heavy Duty” batteries. Rechargeable batteries can also be used. -
Page 7: Quick-Start Demonstration
PINPOINT QUICK-START DEMONSTRATION I. Supplies Needed: Press-and-hold to activate the Pinpoint feature. a Nail (made of iron) a U.S. Quarter (or silver coin) Searchcoil motion is not required; a motionless searchcoil over a metal target a U.S. Nickel a Gold Ring will induce sound. -
Page 8: The Basics Of Metal Detecting
THE BASICS OF METAL DETECTING OPERATING MODES This metal detector is intended for locating buried metal objects. When DISC searching for metals, underground or on the surface, you have the following This preset mode is configured for coin-hunting. challenges and objectives: Iron, foil and aluminum are not detected. -
Page 9: The Basics Of Metal Detecting
MENU THE BASICS OF METAL DETECTING To best understand how to use the Menu features that control target detection 5. EMI (Electromagnetic Interference) and tone response, adjust each to any setting and observe how the The searchcoil produces a magnetic field and then detects changes in that Conductivity Arc behaves - watch how the bold segments, faded segments and magnetic field caused by the presence of metal objects. -
Page 10: How To Work The Controls
HOW TO WORK THE CONTROLS MENU GROUND (continued) The Ground setting is the only user setting that is not saved when the detector is powered off. The user's manual Ground setting carries over into the DISC , DISC DISC modes, but does NOT carry over into DISC modes. -
Page 11: The Display
MENU THE DISPLAY The Menu is located on the left side of the screen. During normal operation the Menu is inactive and faded. Conductivity Arc • to select a Menu option. The option selected is marked by “ ”. (Metal objects are classified by electrical conductivity, the highest to the right) Once a menu option is selected, the setting can be changed using Not all options are available in all Modes. -
Page 12: Target Identification
TARGET IDENTIFICATION OPERATION and CONTROL - an overview Target-ID MENU When objects are detected, the detector will emit a sound and a 2-digit Target-ID The Menu is located on the left side of the screen. During normal operation will appear on the screen. Possible Target-IDs range from 1 to 99. This number the Menu is faded and inactive.