To Select Customized Targets - Bounty Hunter Time Ranger Owenrs Manual

R appears under the metals excluded by the PRESET
level you selected, as shown in the following example.
NOTE:
Pressing PRESET a fourth time clears all PRESET settings
and the unit resets to accept all metals.

To select customized targets

The Time Ranger™ has a valuable detection feature called Progressive Iron
Discrimination which allows you to set four levels of iron discrimination
based on size. Before you can customize targets, you must first select
the size of iron to eliminate.
IR 1 Rejects the smallest of iron objects, such as tacks, small screws and
nails, and BB size objects.
IR 2 Rejects objects up to about twice the size of IR1 type objects.
IR 3 Rejects mid-size objects such as a pocket knife, but detects larger
objects such as a pistol, cannonball or strongbox.
IR 4 Rejects all iron objects.
1. Perform the steps described in Turning the Detector ON section of
this manual.
2. Press REJECT once to select IR1.
IR1 appears in the TARGET readout.
3. Press REJECT twice to select IR2
IR2 appears in the TARGET readout.
R
R
Progressive Iron Discrimination Levels
Example of Time
Ranger™ set to PRESET
2 (iron/foil and pull tabs
are rejected).
16