4. If you are in ALL METAL mode, hold one of the objectsyou selected
for testing over (and about 4" from) the coil.
5. Since gravity causes coins to lie flat on or under the ground, sweep
coins with the flat surface parallel to the search coil. Bounty Hunter™
models with LCD indicators are programmed to sense the coin type
and depth while looking at the flat side of the coin; sweeping the edge
of the coin across the search coil may cause inaccurate readings.
6. If the detector is not properly identifying the object, try sweeping/
holding the object closer to the coil and make sure that you are
sweeping the flat surface of the object parallel to the search coil.
25