Oce PP18C Operation Manual page 67

ADVANCED OPERATION GUIDE
Character Pitch for Courier/Letter Gothic
You can set the character pitch for fixed fonts when the default font is
Courier or Letter Gothic.
1
Press [MENU].
2
Press or
appears.
3
Press . Press
Select > appears.
4
Make sure that Internal is displayed and press
5
Press or
appears.
6
Press [OK] ([ENTER]). A blinking cursor (_)
appears.
7
Press or to increase or decrease the value at the blinking cursor. The
character pitch can be set between 0.44 and 99.99 characters per inch, in
0.01 character-per-inch increments. Use
and left.
8 When the desired size is displayed, press [OK] ([ENTER]).
9
Press [MENU]. The display returns to Ready.
Setting the Code Set
You can change the character code set. Available character code sets vary
depending on the current font. (The default is IBM PC-8.)
1
Press [MENU].
2
Press or
appears.
3
Press .
repeatedly until Font >
or until >Font
repeatedly until >>Pitch
repeatedly until Font >
Using the Operator Panel
Font
>Font Select
Internal
.
>>Pitch
10.00 cpi
>>Pitch
10.00 cpi
or to move the cursor right
Font
>
>
>
2-41