Table of Contents
Advertisement
ADVANCED OPERATION GUIDE
5
Remove the memory module from its package. Aligning the cutouts of the
memory module with the matching keys of the socket, carefully plug the
memory module into the memory socket until it clicks in place.
6
Push down the two socket clamps to secure the memory modules.
Clamp
7
After you finish installing the memory modules, reinstall the main controller
board and fasten it with screws.
Removing a Memory Module
To remove a memory module, remove the main controller board, then
carefully push out the two socket clamps. Ease the memory module out of
the socket to remove.
Testing the expanded memory
To verify that the memory modules are working properly, test them by
printing a status page (see Printing a Status Page on page 2-15).
Options
Cutouts
Clamp
3-5
Advertisement
Table of Contents
