AEG Voxtel D210 User Manual page 19

Press and / to select "DATE & TIME".
Press and / to select "SET DATE".
Press and then enter the date information in the format you set in Section 10.1.1.
Press to confirm.
Note:
By default, the current date will display, starting from 01--01--11 (DD--MM--YY) on power-up.
10.2 Alarm Settings
You can set an alarm time on this phone. When an alarm is set, the alarm icon
display. When the alarm time is reached, the alarm icon
and the alarm tone rings for 45 seconds. You can press any key to disable the alarm.
If the snooze function is activated,the alarm will sound again at the end of the snooze period of seven
minutes. You can also press and hold
snooze function.
Note:
>A key press will still disable the alarm even if the handset keypad is locked when the alarm rings.
>The alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer
is set to "VOLUME OFF", the alarm still sounds at VOLUME 1 level.
>During an external call or internal call, if an alarm is set and when the alarm time is reached, the
and "ALARM ON" will still flash. An alarm tone will be emitted from the earpiece to alert the user the
alarm time is reached. Once the user presses any key or presses and holds
the display will revert to the call duration.
>During paging or ringing, the alarm will not sound when the alarm time is reached. However, if the
snooze function is enabled and there is no paging or ringing, the alarm will sound again at the end of
the snooze period.
10.2.1 Turn on/off the Alarm
Press and / to select "HS SETTINGS".
Press to show "ALARM".
Press and / to select "ON"/"OFF".
Press to confirm.
Note:
If ON is selected, you will be prompted to set the alarm time.
10.2.2 Set the Alarm Time (If Alarm time is set to be "ON")
Follow Steps 1 to 4 in Section 10.2.1.
Enter the alarm time in 24 hour format.
Press to display "SNOOZE".
Press and / to select snooze "ON" or "OFF".
Press to confirm.
10.3 Handset Settings
10.3.1 Set the Ringer Melody for Internal Calls
Press and / to select "HS SETTINGS".
Press and / to select "RING SETUP".
Press to show "INT RING".
Press and / to select the melody you want to hear for internal calls.
Note:
The respective melody will be played while browsing the ringtone list.
Press to confirm.
10.3.2 Set the Ringer Melody for External Calls
Press and / to select "HS SETTINGS".
and "ALARM ON" flash on the handset display,
while the alarm is sounding, to stop the alarm and turn off the
19
is shown on the handset
to disable the alarm,