DVI over UTP Extender Model: 39975 Operation Manual Thank you for purchasing the DVI over UTP Extender. We recommend that you read this manual thoroughly and retain for future reference. Package Contents: • (1) DVI Local Unit (DVI-L) • (1) DVI Remote Unit (DVI-R) •...
Page 3
Connecting the Extenders Note-If you do not have Cat5 cable already installed in-wall and you plan on installing Cat5 behind the wall, we recommend hooking up everything before you install the cable to make sure everything will be functional in your application. 1.
Troubleshooting: Problem Possible Solution No picture 1. Make sure to use Cat5e cables. Other category cables may work, but results cannot be guaranteed using other types. 2. Be sure that each unit is positioned correct. The remote unit should connect to the display, and the local unit should connect to your PC.
To request a Return Merchandise Authorization (RMA) number, contact customer service at 1-800-506-9606 or www.cablestogo.com. Important Safety Information Do not plug the unit in any outlet that does not have enough current to allow the switch to function.
Need help?
Do you have a question about the 39975 and is the answer not in the manual?
Questions and answers