2-Port USB SuperBooster Receiver Wall Plate Part #29345 User Manual...
Page 2
Introduction Thank you for purchasing the USB SuperBooster Receiver Wall Plate. The USB SuperBooster Receiver Wall Plate is one component of a complete solution that, when paired with a transmitter (sold separately) allows you to conquer USB length limitations and put your USB devices where you need them. This wall plate solution extends the distance of a USB device to a host computer up to 150ft so you can place your USB projector, camera, printer, or other USB device exactly where you want it! The USB SuperBooster Wall Plate is powerful yet simple, with no drivers to install or special...
Features • Extends the distance of a USB device from a USB-enabled computer up to 150ft • One part of a total solution- transmitter is purchased separately giving you the flexibility to customize the configuration to your specific needs • Transmitter options include a wall plate (part #29344) or a dongle (part #29348) •...
Page 4
Installing your USB SuperBooster Wall Plate The USB SuperBooster solution has a transmitter unit (sold separately) and a receiver Make certain you install the transmitter unit at your computer or unit. source side. The receiver unit needs to be installed on the device side. 1) Install the Wall Plate Transmitter in a standard J-box where you want your source/computer or connect the Dongle Transmitter to your computer 2) Install the Receiver Wall Plate unit in a standard J-box where you want your USB...
Need help?
Do you have a question about the 29345 and is the answer not in the manual?
Questions and answers