Canon iR2020 Series User Manual page 84

NOT AVAILABLE NOW
Cause1 You pressed the coded speed dialing key or one-touch speed dialing key that
has already been registered, while you perform group dial registration.
Remedy1 Check the information registered under the coded or one-touch speed dialing
key before using.
Cause2 You pressed the one-touch speed dialing key that has already been registered,
while you perform group dial registration.
Remedy2 Check the information registered under the one-touch speed dialing key before
using.
OUTPUT TRAY FULL
Cause The output tray is full of paper.
Remedy Remove the prints from the output trays.
INITIALIZING...
Cause This message is displayed when the main power is turned on.
Remedy Wait until the message disappears.
PLEASE WAIT
Cause This message is displayed during cleaning.
Remedy Wait until the cleaning is complete.
List of Error Messages
3
3-11