Led Displays - Uniden SWS 2500NZ Operating Manual

LED Displays
r-----------------
:1 2 3 4: C
I I
:_~---~-~-~---~~
1
I
4
7
5 6 8
2 3 9
1.
X-Band Signal Indicator- A green LED lights and blinks to
indicate the presence of an X-band radar signal. The blink rate
increases as the radar source gets closer. A distinct audio alert is
also heard.
K-Band Indicator
- An amber(orange)LEDlightsandblinksto
indicate the presence of a K-band radar. The blink rate increases
as the radar source gets closer. A distinct audio alert is also heard.
2.
3.
Ka-SuperWideband SignalIndicator- A red LED lights and blinks
to indicate the presence of a Ka-SuperWideband radar signal. The
blink rate increases as the radar source gets closer.
A distinct audio alert is also heard.
Laser S ignal I ndicator
-
A red LEDunderL lightsandblinksto
indicate the presence of a laser signal. A distinct audio alert is also
heard.
4.
5.
SWS Signal I ndicator
-
When an early warning hazard or
informational signal is detected, the yellow SWS LED begins to
blink. A distinct audio alert is also heard.
Power-OnIndicator-
A green LED under P lights to indicate
power is being supplied to the unit and the unit is turned on. An
amber LED under P lights to indicate power is being supplied to
the unit and also X band is deleted.
6.
7.
LED
Signal S trength M eter - Four LEDs give an accurate visual
indication of the strength of radar or laser signals.
CityMode Indicator
- A green LED under C lights to indicate that
you selected City Mode.
8.
7