Table of Contents
Advertisement
1.
Three-Color LED — Red indicates a radar detection; Green
indicates a laser detection; and Amber indicates a Safety Warning
System(SWS) message.
2.
Band and City/Highway Mode — The first three LEDs indicate
X-, K-, Ka-SuperWideband radar signal, and City or Highway
mode. If a laser signal is detected, LASER will display in the first
five LEDs while the remaining LEDs light. A distinct audio alert
is heard for radar and laser signals.
3.
LED Signal Strength Meter — Starting with the third LED
position, as the signal gets stronger, additional LEDs will light.
See page 18, LED Signal Strength Meter in City Mode.
4.
Safety Warning System (SWS) Display — All eight LEDs display
SWS messages. Messages longer than eight-digits are scrolled
repeatedly. When SWS data is received and cannot be specified,
'SAFETY WARNING MESSAGE' displays. A distinct audio
alert is heard for SWS messages.
5.
Dimmer/Audio Mode — The fifth LED position indicates Dimmer
(D) or Audio (A) mode. Dimmer mode dims the LEDs but
displays all possible data. Audio mode disables signal displays and
dims the Three-Color LED.
6.
Mute Mode — The seventh LED position indicates Mute (M)
mode. Signals received sound for a few seconds then are reduced
to half the normal tone (Mute tone).
LED Displays
1
2
7
3
4
5
6
Advertisement
Table of Contents
