Led Signal Strength Meter In City Mode; Safety Warning System Operation - Uniden SWS 2500NZ Operating Manual

~
LED Signal Strength Meter in City Mode
The LED signal strength meter gives you instant information about the
strength of the signal being detected. A weak signal causes the first LED
to light. As signal strength increases, more LEDs light. All four LEDs
light when full signal strength is received. Use this meter to judge the
distance from the signal source.
Safety Warning System Operation
The Safety Warning System (SWSTM)is a new communication system
that will provide an early warning when a road hazard exists. The
SWS2500NZ is capable of detecting the SWS signal broadcast on the K-
band by either law enforecement or local departments of transportation.
The yellow SWS LED blinks, while an audible alert sounds. When this
alert sounds, you should tune to local radio traffic reports and prepare to
slow down or stop your vehicle because you could be approaching an
accident, bad road conditions caused by weather, or road crews or
construction.
18
Signal Strength
X-, K-, Ka-Super
Laser
Wide Band, SWS
.000
Visual Visual!Audio
..00
Visual
Visual/Audio
...0
Visual/Audio
Visual/Audio
....
Visual/Audio
Visual/Audio