Led Signal Strength Meter In City Mode; Safety Warning System Operation - Uniden LRD6299SWS Operating Manual

LED Signal Strength Meter in City Mode

The LED signal strength meter gives you instant information about the
strength of the signal being detected. A weak signal causes the first LED
to light, but as signal strength increases, more LEDs light. All four LEDs
light when full signal strength is received. Use this meter to judge the
distance from the signal source.
Signal Strength

Safety Warning System Operation

The Safety Warning System (SWS™) is a new communication system
that will provide an early warning when a road hazard exists. The LRD
6299SWS/LRD 6399SWS is capable of detecting the SWS signal
broadcast on the K-band by either law enforcement or local departments
of transportation. The yellow SWS LED blinks and the amber K-band
LED lights, while an audible alert sounds. When this alert sounds, you
should tune to local radio traffic reports or prepare to slow down or stop
your vehicle because you could be approaching an accident, bad road
conditions caused by weather, or road crews or construction.
X-, K-, and Ka-Super
WideBand
Visual
Visual
Visual/Audio
Visual/Audio
16
Laser
Visual/Audio
Visual/Audio
Visual/Audio
Visual/Audio