Led Signal Strength Meter In City Mode; Safety Warning System Operation - Uniden LRD2200SWS Operating Manual

Complete integrated laser/radar detector

Table of Contents

LED Signal Strength Meter in City Mode

The LED signal strength meter gives you instant information about the

strength of the signal being detected. A weak signal causes the first LED

to light, but as signal strength increases, more LEDs light. All four LEDs

light when full signal strength is received. Use this meter to judge the

distance from the signal source.

Signal Strength

The Safety Warning System (SWS™) is a new communication system

that will provide an early warning when a road hazard exists. The

LRD 2200SWS is capable of detecting the SWS signal broadcast on the

K-band by either law enforcement or local departments of transportation.

The yellow SWS LED blinks and the amber K-band LED lights, while an

audible alert sounds. When this alert sounds, you should tune to local

radio traffic reports or prepare to slow down or stop your vehicle because

you could be approaching an accident, bad road conditions caused by

weather, or road crews or construction.

X-, K-, and Ka-Super

WideBand

Visual

Visual/Audio

Laser

Visual/Audio

Table of Contents