Table of Contents
Advertisement
Fireplace Installation
the unit into the wall.
⑫
Place unit in position in the
opening, push straight in and
attach unit to studs using No. 10
fasteners. Attach supplied wall
cover brackets to the top and the
bottom of fireplace to cover the
gap on the dry wall (Figure 7).
⑬
Attach fireplace frame as
shown in Figure
Figure 7
Add
wood
screws
here
12
3.
Bathroom Installation
This firebox must be protected
by a GFI receptacle or circuit for
bathroom use. If receptacle is
used it must be readily accessible.
This unit is an electrical appliance
that is not watertight and must
be installed as to prevent water
from entering the unit to prevent
electrical shock. This unit must
be installed away from showers,
tubs, etc.
Never locate fireplace where it
may fall into a bathtub or other
water containers. Keep towels
and other combustible materials
0.9 m away from the bottom of
the unit.
www.dimplex.com
Advertisement
Table of Contents
