Bathroom Installation - Dimplex VCX1525 Owner's Manual

Fireplace Installation
cable.
!
NOTE: All wiring must be
completed prior to installing the
unit into the wall.
12. Place unit in position in the
opening, push straight in and
attach unit to studs using
No. 10 fasteners (not includ-
ed) (Figure 8).
13. Attach supplied wall cover
brackets to the top and the
bottom of fireplace to cover
the gap on the dry wall (Fig-
ure 9).
14. Attach fireplace frame as
shown in Figure

Bathroom Installation

This firebox must be protected
by a GFI receptacle or circuit for
bathroom use. If receptacle is
used it must be readily acces-
sible.
This unit is an electrical appliance
that is not watertight and must
be installed as to prevent water
from entering the unit to prevent
electrical shock. This unit must
be installed away from showers,
tubs, etc.
Never locate fireplace where it
may fall into a bathtub or other
water containers. Keep towels
12
4.
Figure 6
Figure 7
and other combustible materials
3 ft (0.9 m) away from the bottom
of the unit.
www.dimplex.com