Turn Caller Id With Call Waiting On Or Off; Set The Display Language; Telephone Operation; Make, Answer Or End A Call - AT&T 992 User Manual

0992_CIB_1ATT_FINAL_022105 2/22/04
Turn Caller ID with Call Waiting
On or Off
If you subscribe to combined Caller ID with Call Waiting
service from your local phone service provider, you need
to turn this feature on in order to see call information for
Call Waiting calls.
1 Press E to begin feature setup.
❖ ❖
❖ Press - until the screen display includes
2
❙ ❙
❙
CALLER ID.
3 Press E. The screen display includes AREA
CODES.
Press - until the screen display includes
4
CID-CALL WAIT and the current setting.
5 Press < or > to toggle between
When the correct setting is shown, press - or
6
E to save your choice. The screen display
includes MAIN MENU.
7 Press E to return to the main Feature Setup
menu and continue setting up your phone.
— OR —
Press and hold E to return to the idle screen.

Set the Display Language

1 Press E to begin feature setup.
❖ ❖
❖
2 Press - until the screen display includes
❙ ❙
❙
LANGUAGE and the current setting.
3 Press < or > to scroll through the language
choices (English, Espanol, or
When the language you want to use is displayed,
press - or E to save the setting.
4 Press and hold E to return to the idle screen.
24
4:46 PM Page 24
ON and OFF .
Fran c ais).

TELEPHONE OPERATION

NOTE: When you make a call, the phone selects the
Primary Line you programmed (See "Set a Primary
Line" on page 14). When you answer a call, the phone
automatically selects the ringing line.

Make, Answer or End a Call

NOTE: If the phone is in use on one line, any calls
made or answered on the other line will use the same
mode (handset, speakerphone, or headset) already in use.
NOTE: If you dial a phone number longer than 16
digits, the screen will display only the last 16 digits.
Handset
To make a call, lift the handset and dial the call. The
number appears on screen as you dial.
To answer a call, lift the handset.
❚ ❚
❚
To override automatic line selection, lift the handset,
then press and release a LINE button
— OR —
Press the LINE button for the line you wish to select,
then lift the handset.
To end the call, replace the handset.
Speakerphone
To make a call, press K. The SPEAKER light goes
on. Wait for a dial tone, then dial the call. The number
appears on screen as you dial.
To answer a call, press K or press the LINE
button of the incoming call, then press K.
To override automatic line selection, press K,
then press and release a LINE button. Dial the call within
five seconds.
— OR —
Press the LINE button for the line you wish to select,
then press K. Dial the call within five seconds.
To end a call, press K again.
NOTE: If headset is programmed as the default mode
(see "Set Preferred Mode" on page 16), you must press
K to activate the speakerphone.
continued on page 26
25