Turn Caller Id With Call Waiting On Or Off; Set The Display Language; Telephone Operation; Make, Answer Or End A Call - AT&T 992 User Manual

0992_CIB_1ATT_FINAL_022105 2/22/04
Turn Caller ID with Call Waiting
On or Off
If you subscribe to combined Caller ID with Call Waiting
service from your local telephone company, activate
this feature in order to see call information for
Call Waiting calls.
1.
Press E to begin feature setup.
❖ ❖
❖ 2. Press - until the screen display includes
❙ ❙
❙
3.
Press E. The screen display includes
Press - until the screen display includes
4.
5.
Press < or > to toggle between
When the correct setting is shown, press - or
6.
E to save your choice. The screen display
includes
7.
Press E to return to the main Feature Setup
menu and continue setting up your telephone.
— OR —
Press and hold E to return to the idle screen.

Set the Display Language

1.
Press E to begin feature setup.
❖ ❖ 2.
❖
Press - until the screen display includes
❙ ❙
❙
3.
Press < or > to scroll through the language
choices (
When the desired language is displayed,
press - or E to save the setting.
4.
Press and hold E to return to the idle screen.
24
4:46 PM Page 24
.
.
and the current setting.
and .
.
and the current setting.
, , or ).

TELEPHONE OPERATION

NOTE: When making a call, the telephone uses the
Primary Line programmed (See Set a Primary
Line on page 14). When answering a call, it
automatically selects the ringing line.

Make, Answer or End a Call

NOTES:
1. If one line is in use, any calls made or answered on the
other line will use the same mode (handset, speaker-
phone, or headset) already in use.
2. If you dial a telephone number longer than 16 digits,
the screen will display only the last 16 digits.
Handset
To make a call, lift the handset and dial the call. The
number appears on screen when dialing.
To answer a call, lift the handset.
❚ ❚
❚
To override automatic line selection, lift the handset,
then press and release a LINE button.
— OR —
Press the LINE button for the desired line and lift the
handset.
To end the call, replace the handset.
Speakerphone
To make a call, press K. The SPEAKER light goes
on. Wait for a dial tone before dialing the call. The number
appears on screen when dialing.
To answer a call, press K or press the LINE
button of the incoming call, then press K.
To override automatic line selection, press K,
then press and release a LINE button. Dial the call within
five seconds.
— OR —
Press the LINE button for the desired line and
press K. Dial the call within five seconds.
To end a call, press K again.
NOTE: If headset is programmed as the default mode
(see Set Preferred Mode on page 16), you must press
K to activate the speakerphone.
continued on page 26
25