Store A Name And Number In The Directory - AT&T 992 User Manual

0992_CIB_1ATT_FINAL_022105 2/22/04
Store a Name and Number
in the Directory
1 Press D to begin working with the
directory.
2 Press - until the screen display includes ADD
ENTRY.
3 Press E. The screen display includes
Enter name.
4 Use the dial pad keys and the chart below to
❖ ❖
❖
enter the letters, digits or symbols you wish to
❙ ❙
❙
store. Press the key repeatedly until the character
you want is shown on the screen. For example,
press 2 once for "A," twice for "B," three times
for "C," and four times for "2." When you want
to enter two characters in a row which share a
dial pad key (for example "M" and "O") you must
press > to move the cursor to the next position.
Press > to move or add a space. Press < to
backspace. The name will appear on screen as
you enter it.
PRESS: ONCE TWICE 3 TIMES 4 TIMES 5 TIMES 6 TIMES 7 TIMES 8 TIMES
1
, -
2
A B
3
D E
4
G H
5
J K
6
M N
7
P Q
8
T U
9
W X
*
*
0
0
#
#
5 When you are finished entering the name, press
E to move on to enter the phone number.
The screen displays the name you entered and
Enter number.
38
4:46 PM Page 38
' & . ( )
C 2
F 3
I 4
L 5
O 6
R S 7
V 8
Y Z 9
❖ ❖
❖
❙ ❙
❙
1
6 Use the dial pad keys to enter the phone number
you wish to store
—OR—
Press R to copy the last number dialed
at this extension onto the screen.
Press > to move to the next character or
space. Press < to backspace. The number will
appear on the second line of the screen as you
enter it.
7 When you are finished entering the number, press
E to store the name and number in the
directory. The screen briefly displays the name
and number you stored and SA E V D!. Then the
screen will automatically return to include ADD
ENTRY.
NOTE: To exit the directory at any time without
storing the entry, simply press D. The screen
will automatically return to the idle screen.
Store a Wait in a Directory Number
You can include a 30-second wait in a number stored in
the directory. When you reach the place in the dialing
sequence where you wish to enter a wait, press - until
the screen display includes WAIT. Then, press E to
store a 30-second wait, and continue entering the number.
Each wait counts as one digit.
39