Degrees C/F Menu; Daylight Savings Menu; Temp Calibration Menu - Jandy Aqualink RS Owner's Manual

Onetouch control systems for use with pool/spa combination, pool only/spa only, and dual equipment aqualink rs systems
Hide thumbs Also See for Aqualink RS:
Table of Contents

Advertisement

Page 26

Degrees C/F Menu

The Degrees C/F menu allows you to change the AquaLink RS temperature display from Fahr en heit to Celsius or vice
versa. When changing from Fahrenheit to Celsius you will have to re-enter the temperature settings.
To change the Temp readout
Highlight MENU/HELP and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight DEGREES
C/F and press SELECT. Use the UP/DOWN arrow keys to highlight desired setting and press SELECT.

Daylight Savings Menu

The DAYLIGHT SAVINGS menu enables the automatic adjustment for Daylight Savings Time.
To set up Daylight Savings
Highlight MENU/HELP and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight DAYLIGHT
SAVINGS and press SELECT. Use the UP/DOWN arrow keys to highlight ENABLED or DISABLED and press
SELECT. Default setting is ENABLED.

Temp Calibration Menu

This menu allows adjustment of the temperature that is displayed on the AquaLink RS. The temperature can only be
adjusted up 4 degrees Fahrenheit or down 4 degrees Fahrenheit, see note below.
To adjust Temperature display
Highlight MENU/HELP and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight TEMP
CALIBRATE and press SELECT. Use the UP/DOWN arrow keys to set values and press SELECT when finished.
NOTE
If the temperature is off by more than four (4) degrees, contact your local service representative.
SYSTEM SETUP
ONETOUCH
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
IN FLOOR CLEAN
SOLAR PRIORITY
MORE
SYSTEM SETUP
ONETOUCH
LABEL AUX
FLOWLINK SETUP
FREEZE PROTECT
AIR TEMP
DEGREES C/F
DAYLIGHT SAVIN
TEMP CALIBRATE
MORE
SYSTEM SETUP
ONETOUCH
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
IN FLOOR CLEAN
SOLAR PRIORITY
MORE
DEGREES C/F
FAHRENHEIT
CELSIUS
Choose setting
and press SELECT
AUTO
DAYLIGHT SAVINGS
TIME CHANGE
ENABLED
DISABLED
Choose setting
and Press SELECT
TEMP CALIBRATE
WATER TEMP
80°F
Use ARROW KEYS
to set value.
Press SELECT
when finished.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aqualink rs onetouch

Table of Contents