System Setup Menu; Boost Menu - Jandy Aqualink RS Owner's Manual

Page 22

System Setup Menu

Check with installer before making changes to the SYSTEM SETUP.
To use the System Setup menu
Highlight MENU/HELP and press SELECT, highlight SYSTEM SETUP and press SELECT. Use the UP/DOWN
arrow keys to move the highlight bar up or down, or use PAGE UP or PAGE DOWN to move through the menus.
Press SELECT on the highlighted item to move to the next screen.
Boost Pool Menu
Activates the BOOST POOL feature that will operate the AquaPure Chlorine Generator in Pool Mode at 100%
output for 24 hours. Boost Pool mode will override all programs, ALL OFF settings, as well as manual operation of
the filter pump. Boost is not available in Spa Mode.
The AquaLink RS is compatible with only Jandy AquaPure, Jandy PureLink and Clormatic branded
Electronic Chlorine Generators. Connecting other brands of Electronic Chlorine Generators to the
AquaLink RS system will disable the Electronic Chlorine Generator and cause the AquaLink RS to
function improperly.
To use the Boost Pool menu
Highlight MENU/HELP and press SELECT, highlight BOOST POOL and press SELECT. Highlight START and
press SELECT to begin the chlorination cycle.
Use SET AQUAPURE in MENU/HELP to set the percentage and the AQUAPURE HOURS in SYSTEM SETUP to
set the hours of operation.
To pause or stop Boost Pool
To pause or stop BOOST POOL mode, highlight MENU/HELP and press SELECT. Highlight BOOST and press
SELECT. Then highlight PAUSE or STOP and press SELECT.
MENU
HELP
PROGRAM
SET TEMP
SET TIME
DISPLAY LIGHT
LOCKOUTS
PROGRAM GROUP
SYSTEM SETUP
MENU
HELP
PROGRAM
SET TEMP
SET TIME
SET AQUAPURE
DISPLAY LIGHT
LOCKOUTS
PROGRAM GROUP
SYSTEM SETUP
BOOST POOL
SYSTEM SETUP
ONETOUCH
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
IN FLOOR CLEAN
SOLAR PRIORITY
MORE
NOTICE
BOOST POOL
Operate the
AQUAPURE
chlorinator
at 100%
for 24 hrs.
START
GO BACK
BOOST POOL
TIME REMAINING
23:59
PAUSE
RESTART
STOP
GO BACK