Ni-Mh Rechargeable Battery Pack - Johnson Level & Tool 40-6560 Instruction Manual

40-6560_6570 English
Note:
(1) Even after battery pack appears to be full charged, we suggest
users continue to charge for 2 more hours to ensure the battery-
pack's maximum charge capacity.
(2) We also suggest charging a new battery during its initial charge
for at least ten hours.
(3) The instrument will still work even if it being charged with
adapter.
(4) Do not charge alkaline batteries to avoid explosion.
(5) Used (discharged) batteries are hazardous waste and should be
disposed of properly.
Instrument Usage
1. Put in Ni-MH rechargeable battery pack, or 4 "C" alkaline batteries
(not included), or connect with the 6V DC power through the
power jack.
2. Place the instrument on a platform or tripod, connecting with tripod
to the 5/8" screw thread at the bottom of the instrument.
Note: If the instrument is inclined beyond the self-leveling range,
the instrument will deliver an audible alarm. You will need to
re-position the instrument until it can be leveled.
3. Press power switch to turn power on, and press operation buttons
on control panel or use remote control to adjust to your desired
working status.
4. After finishing operation or before moving the instrument, turn the
power off.
8
5/5/05 4:30 PM Page 8
©2005 Johnson Level & Tool