Table of Contents
Advertisement
Precautions
Before installing your DVD/CD Copy Tower Pro HS, please read the
following.
Installation
Avoid placing the DVD/CD Copy Tower Pro HS in a location subject to:
• High humidity
• High temperature
• Excessive dust
• Mechanical vibration
• Direct sunlight
• Electromagnetic radiation
Power
This product has a manually switchable power supply. Make sure
that the power supply is set to the proper voltage for your region.
Input Voltage Selection
There is a voltage selection switch on the back of the unit that can be set for
input power of 115 VAC (the default setting) or 230 VAC. Be sure it is set
correctly for the input voltage you will be using.
Operation
Do not move the DVD/CD Copy Tower Pro HS during operation. This may
cause it to malfunction during operations.
Avoid exposing the duplicator to sudden changes in temperature as
condensation may form on the lens inside the duplicator. Operating the
duplicator immediately after a sudden increase in temperature may result in
a malfunction during playback or writing operations.
Note: The DVD/CD Copy Tower Pro HS must never be cleaned with a lens
cleaning kit!
Transportation
Keep the original packing materials for future moving or shipping of the
DVD/CD Copy Tower Pro HS.
6
www.aleratec.com
Advertisement
Table of Contents
Need help?
Do you have a question about the 1:3 DVD/CD Copy Tower Pro HS and is the answer not in the manual?