Leveling Bolts; Electrical Requirements - Travis Industries DVS GSR2 NB Insert Owner's Manual

Installation (for qualified installers only)

Leveling Bolts

This heater includes
front and rear leveling
bolts to accommodate
fireplaces with a step-
down firebox.
NOTE: To access the
rear leveling bolts,
remove the cover plates
and gaskets (replace
after adjustment).

Electrical Requirements


Route the power cord out of the access hole on the right side of the appliance.

Plug the power cord into a grounded 120 Volt outlet (do not remove the grounding pin).

The electrical connection may also be made using the optional Wiring Kit (SKU 97200315).

The appliance, when installed, must be electrically grounded in accordance with local codes or, in
the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian
Electrical Code, CSA C22.1.
© Travis Industries 4140429
11
1/2"
100-01295