1. Manuals
  2. Brands
  3. Grandhall Manuals
  4. Grill
  5. OB2610ALP
  6. Operator's manual

Grandhall OB2610ALP Operator's Manual

Gas grill
Hide thumbs
Table of Contents

Advertisement

Quick Links

Liquid Propane Gas (LPG) Grill
Models OB2610ALP,OB3210ALP & OB3210BLP
Natural Gas (NG ) Grill
Models OB2610ANG,OB3210ANG & OB3210BNG
OB2610ALP/NG
(For Built-in Model)
FREE HELP
FROM THE GRILL EXPERTS
Grand Hall is the expert on this product and
trained to help you with:
Ÿ
Assembly Questions
Ÿ
Grill Operation
Ÿ
Replacement of Damaged or Missing parts
visit www.grandhall.com or call:
1-877-934-7455
Monday - Friday 8:00am-4:30pm CST
IMPORTANT:
Ÿ
NOTE TO ASSEMBLER / INSTALLER:
Leave this manual with the consumer.
Ÿ
NOTE TO CONSUMER:
Keep this manual for future reference.
Ÿ
RECORD YOUR SERIAL # __________________
(see silver CSA label on main body of grill)
OB3210ALP/NG
(For Built-in Model)
WARNING
!
Ÿ
Failure to comply with these instructions could
result in a fire or explosion that could cause
serious bodily injury, death or property damage.
Ÿ
Whether this grill was assembled by you or
someone else, you must read this entire manual
before using your grill to ensure the grill is
properly assembled, installed and maintained.
Ÿ
Use your grill at least 3 feet away from any
wall or surface. Use your grill at least 3 feet
away from combustible objects that can melt or
catch fire such as vinyl or wood siding, fences and
overhangs or sources of ignition including pilot
lights on water heaters and live electrical appli-
ances.
Ÿ
THIS GAS APPLIANCE IS DESIGNED FOR OUT-
DOOR USE ONLY.
Ÿ
Never use your gas grill in a garage, porch,
shed, breezeway or any other enclosed area.
Ÿ
Never obstruct the flow of ventilation air
around your gas grill housing.
Ÿ
Never disconnect the gas regulator or any gas
fitting while your grill is lit. A lit grill can ignite
leaking gas and cause a fire or explosion which
could result in property damage, personal injury
or death.
Operator's Manual
OB3210BLP/NG
(For Cabinet Model)
Manual # P80151123A - Date:2011/01/11
!

Advertisement

Table of Contents
loading

Related Manuals for Grandhall OB2610ALP

Summary of Contents for Grandhall OB2610ALP

  • Page 1: Primary Safety Warnings

    FROM THE GRILL EXPERTS Ÿ Failure to comply with these instructions could Grand Hall is the expert on this product and result in a fire or explosion that could cause trained to help you with: serious bodily injury, death or property damage.

  • Page 2: Table Of Contents

    Patents held by Grand Hall include the following: • Brass components on the grill, such as hose fit- The Crossray Burner System by Grand Hall is covered tings, propane cylinder valves (sold separately) and by Australian Patent No. 2006100635, Chinese Patent No.

  • Page 3: Pre-Assembly Instructions

    To begin your “restaurant quality” grilling, become familiar with all of the cooking elements of your Grand Hall Grill light- Do not assemble or operate the grill if it appears dam- ing and operating instructions.

  • Page 4: Part Diagrams And Lists

    Hardware Parts List for Models OB2610ALP/NG & OB3210ALP/NG PART # PART DESCRIPTION PURPOSE OF PART For use in assem bly of Model OB3210ALP, OB2610ALP, P06006078A Hardware Pack OB3210ANG & OB2610ANG S182G03061 Pan Head Screw 3/16" x 3/8" Install the Control Box S182G03061 Pan Head Screw 3/16"...
  • Page 5 Hardware Parts List for Models OB3210BLP/NG PART # PART DESCRIPTION PURPOSE OF PART P06006080A Hardware Pack For use in assembly of Model OB3210BLP/NG S182G03061 Pan Head Screw 3/16" x 3/8" Install Cabinet Bottom Panel S182G03061 Pan Head Screw 3/16" x 3/8" Install Cabinet Rear Panel S185G03061 Bolt 3/16"...
  • Page 6 Parts Diagram for Models OB2610ALP/NG-Grill...
  • Page 7 Parts List for Models OB2610ALP/NG-Grill DESCRIPTION OB2610ALP/NG PART# Lid Assembly P0014633AA Tem perature Gauge P00601381A Lid Handle Bracket, Left P00307058E Lid Handle Bracket, Right P00308058E Lid Handle P00215037H Protective Pad P05518002I Lid Assembly Bracket, Left P03320007C Lid Assembly Bracket, Right...
  • Page 8 Parts List for Models OB2610ALP/NG-Grill DESCRIPTION OB2610ALP/NG PART# Grease Tray Bracket Y0270027 Grease Tray Handle P0272012CC Grease Tray Slide Set P05516140M Lam p Wire Set Protector P055330103 Control Box P05545006M LED Light Controller P05357021B Control Box Bracket P03343022C Hose, 12 FT, NG...
  • Page 9 Parts Diagram for Models OB3210ALP/NG & OB3210BLP/NG-Grill...

  • Page 10: P05518002I

    Parts List for Models OB3210ALP/NG & OB3210BLP/NG-Grill DESCRIPTION OB3210ALP/NG PART# OB3210BLP/NG PART# Lid Assembly P0014734AA P0014734AA Temperature Gauge P00601381A P00601381A Lid Handle Bracket, Left P00307058E P00307058E Lid Handle Bracket, Right P00308058E P00308058E Lid Handle P00215036H P00215036H Protective Pad P05518002I P05518002I Lid Assembly Bracket, Left P03320007C P03320007C...

  • Page 11: P05545006M

    4. Quantity of parts needed Important: Use only Grand Hall replacement parts. The use of any part that is not a Grand Hall replacement part can be dangerous and will also void your product warranty. Keep this Operator's Manual for convenient referral and for part...
  • Page 12 Parts Diagram for Models OB3210BLP/NG-Cabinet...
  • Page 13 4. Quantity of parts needed Important: Use only Grand Hall replacement parts. The use of any part that is not a Grand Hall replace- ment part can be dangerous and will also void your product warranty. Keep this Operator's Manual for...

  • Page 14: Assembly Instructions

    Assembly Instructions for OB3210BLP/NG CAUTION : While it is possible for one person to assemble this grill, obtain assistance from another person when handling some of the larger, heavier pieces. Unfold Left and Right Cabinet Open carton and remove all packing materials. Unfold the left cabinet as shown.
  • Page 15 Install Partition Panel Place Partition Panel over the bolts of left cabinet and right cabinet. (the bolts are already installed) (see Fig. 3 & Fig. 4) Partition Panel Fig. 3 Fig. 4 Left Right Install Outer Partition Panel Install 6 Bolts 3/16"x3/8" to left and right cabinet, then place the Outer Partition Panel over the bolts.
  • Page 16 Install Grill Bowl and Tank Holder (Tank Holder is only for LP Model) Make sure all cooking components are removed from the Grill Bowl. Lift and position the Grill Bowl over the Support Brackets. Note: Make sure the Control Box wire goes through the "U" shaped hole on right cabinet.(as shown) Align the holes on the Grill Bowl with the holes on the Support Brackets using 8 Pan Head Screws 3/16"x3/8"...
  • Page 17 Install Control Box, Partition Panel, Tansformer and Batteries Install Control Box: Align the holes in the Control Box bracket with the holes in the right cabinet using 2 Pan Head Screws 3/16"x3/8" and tighten securely. (see Fig. 1) Install Partition Panel: Place Partition Panel with Transformer Bracket over the bolts of the right cabinet.(similar to step 4) Install Transformer: Install Transformer onto the Transformer Bracket by putting the four pre-assembled screws on the Transformer into the four holes on the Transformer Bracket.
  • Page 18 Remove Hose Connector and Install LP Regulator (only for OB3210BLP Model) Remove the Regulator Hose Connector from the Gas Manifold LP Regulator Hose. (see Fig.1) Regulator Connect the LP Regulator Hose to the Gas Hose manifold. (see Fig. 2) Hose Fig.
  • Page 19 Install Upper & Lower Door Bracket and Doors Install 2 Upper Door Brackets onto left and right cabinet using 4 Pan Head Screws 3/16"x 3/8" and tighten securely. (see Fig.1) Install 2 Lower Door Brackets onto left and right cabinet using 4 Countersunk Flat Head Screws 3/16"x 3/8" and tighten securely.
  • Page 20 Replace Rear Lower Bowl Panel (only for OB3210B Model) Unscrews and remove the Rear Lower Bowl Panel and the Rear Trim Panel from the back of the Grill Bowl. (see Fig. 1) Install the new Rear Lower Bowl Panel onto the back of the Grill Bowl using the same screws and tighten securely. (see Fig.2) (do not reinstall the Rear Trim panel) Rear Lower Bowl Panel Fig.2...
  • Page 21 Burner Electrode Check Perform this Install Grease Tray Heat Shield Electrode Check with the assistance of and Cooking Components another person Install the Grease Tray Heat Shield by placing the 4 pins on the Grease Tray Heat This test will ensure that the Spark Electrode Tips Shield into the 4 Holes in the Grill Bowl.
  • Page 22 Assembly Instructions for OB2610ALP/NG & OB3210ALP/NG CAUTION : While it is possible for one person to assemble this grill, obtain assistance from another person when handling some of the larger, heavier pieces. CAUTION: Build your grill island before installing the LP Gas Tank and Partition Panel (Not included in this unit).
  • Page 23 Install Transformer. Connect the Transformer to Power Source and Turn on the Grill Lights. Install the Transformer Bracket onto the underside of the Right Bowl Panel using 2 Pan Head Screws 3/16"x3/8" and tighten securely (see Fig.1). Install Transformer onto the Transformer Bracket by putting the four pre-assembled screws on the Transformer into the four holes on the Transformer Bracket.
  • Page 24 Install Tank Tray Set and LP Gas Tank (For LP Model) Install the Tank Tray Set onto the Island Bottom Panel. Secure the Tank Tray set by installing 3 Pan Head Screws 3/16"x3/8". (see Fig. 1) Place the LP Gas Tank into the Tank Tray. Make sure the Tank Valve faces the right corner of the Island. Tighten the Wing Bolt to secure the LP Gas Tank.
  • Page 25 Cooking Grids Grease Tray Heat Shield Spark Gap 1/8" For OB2610ALP/NG Model Final Grill Assembly Step When you have finished assembling your grill, be sure that all screws are tightened for safe operation of your grill. CAUTION: The Grease Tray should be inspected before each grill use to be sure there is no exces- sive grease buildup.

  • Page 26: Lp Gas Tank Installation

    Replacement regulators and hose • Use your grill at least 3 feet away from any wall or assemblies must be those specified by Grand Hall. surface. • Use your grill 3 feet away from any combustible...

  • Page 27: Use & Care Instructions

    5" from the floor of the built-in. Every ventilation opening must have a minimum of 1/8" (See Step 6 on page 24). Contact a Grand Hall associate for more details. NOTE: The appliance is only for installation in a built- in enclosure constructed of non-combustible materi- als.
  • Page 28 Refer to this table when designing the Built-in unit your tank only for an OPD safety feature-equipped tank as for the OB2610ALP/NG & OB3210ALP/NG. Side* and described in the LP Gas tank section of this Guide. Rear* show the minimum amount of distance the unit must be from combustibles (ex.
  • Page 29 USE AND CARE INSTRUCTIONS LP Gas Model only: Check all connections for LP Gas Leaks Connect Regulator with Hose to your LP Gas Tank Never test for leaks with an open flame. Prior to first use, at the beginning of each season, or every time Turn all Burner Valves to the OFF position.

  • Page 30: Natural Gas Connection

    Natural Gas Connection Natural Gas Model only: Gas Line Piping: Connecting Natural Gas To Your Grill If the length of line required does not exceed 50 feet, Connect the Swivel nut of the 12' Natural Gas use a 5/8" O.D. tube. One size larger should be used Hose to the horizontal fitting of NG Regulator as for lengths greater than 50 feet.

  • Page 31: Lighting Instructions

    Replace the batteries when low battery as noted Ignitor Light Switch below: Rear Burner Front Burner If LED burner indicator light does not work when For OB2610ALP/NG Models burner is lit. If any of the LED indicator(s) is lit when its related burner is in "OFF" position.

  • Page 32: Troubleshooting

    USE AND CARE INSTRUCTIONS Troubleshooting To purge air from your gas line and/or reset the regulator excess gas flow device: If the grill fails to light : Turn Control Knobs to the OFF position. Turn gas off at source and turn Control Knobs to OFF.

  • Page 33: Correct Transformer And Light Use

    USE AND CARE INSTRUCTIONS CORRECT TRANSFORMER AND LIGHT USE WARNING Read all instructions before initial use. IMPORTANT: When using transformer appliances, basic safety precautions should always be used. To protect against electrical shock, do not immerse The Transformer is set for 120V, 60Hz AC current input, electrical cord, plugs or motor in water or expose to 12VAC, 25W output.

  • Page 34: Cleaning And Maintenance

    CLEANING AND MAINTENANCE Cleaning Exterior Stainless Steel Surfaces: Routine care and maintenance is required to preserve Proper care and maintenance will keep your grill in top operat- the appearance and corrosion resistance of stainless ing condition and prolong its life. Follow these cleaning proce- steel.
  • Page 35 Infrared Grill Cooking Instructions Indirect Cooking Burn-Off Before cooking on your gas grill for the first time, you To cook indirectly, the food should be placed on the should "burn off" the grill to eliminate any odor or foreign left or right side of your grill (or Secondary Rack) with the matter.
  • Page 36 Guide to Infrared Grilling using the Direct Cooking Method Cut of Meat Approx. Total Cooking Times Grilling Steak and Ribs Turn the grill Burners on , close the Lid and preheat your T-bone steak Rare: 4-6 minutes grill 3 to 5 minutes. Open Lid and place food on the mid Sirloin steak Medium: 6-8 minutes section of a Cooking Grid.
  • Page 37 Guide to Roasting & Baking using the Indirect Cooking Method Food preparation An Important Note About Infrared Heat Settings Trim meat of excess fat. Truss meat and poultry with cooking The suggested heat settings and cooking times shown are approximate. Unlike the controlled environment inside your string to retain shape if desired.
  • Page 38 Guide to Stir-Frying and Deep-Frying DEEP-FRYING TECHNIQUES STIR-FRYING TECHNIQUES A wide variety of foods can be deep-fried outdoors on your This method of cooking is popular around the world and can grill, from potatoes, to seafood and chicken. Deep-frying be easily accomplished outdoors on your gas grill. It's a quick uses a large portion of oil, preferably saturated.
  • Page 39 Question: Question: Sometimes I hear a humming sound coming from my Can I convert my grill from one fuel type to another in regulator. What causes this? And - My grill has a low other words from LPG to NG or vice versa? flame and sometimes will not light.
  • Page 40 Question: After every use (after your grill has cooled down), wipe The Regulator and Hose supplied with my gas grill stainless surfaces with a soft, soapy cloth or sponge does not fit the older LP Gas tank I’ve used for years. then rinse with water.
  • Page 41 Grand Hall Limited Warranty Grand Hall will warrant to the ORIGINAL PURCHASER of this product that it will be free of defects in material and workmanship for set periods below from the date of purchase when used under normal outdoor use...

This manual is also suitable for:

Ob3210alpOb2610angOb3210angOb3210bngOb3210blp

Table of Contents