D-Link DSR-250N User Manual page 42

Unified Services Router

For finer control, the Rate profile type can be used. With this option the
minimum and maximum bandwidth allowed by this profile can be limited.

Choose the WAN interface that the profile should be associated with .
Fig ure 20: B and widt h Prof ile Co nfig uration pag e
Advanced > Advanced Network > Traffic Management > Traffic Selectors
Once a profile has been created it can then be associated with a traffic flow from the
LAN to WAN. To create a traffic selector, click Add on the Traffic Selectors page.
Traffic selector configuration binds a bandwidth profile to a type or source of LAN
traffic with the following settings:

Available profiles: Assign one of the defined bandwidth profiles

Service: You can have the selected bandwidth regulation apply to a specific
service (i.e. FTP) from the LAN. If you do not see a service that you want, you
can configure a custom service through the
Custom Services

Traffic Selector Match Type: this defines the parameter to filter against when
applying the bandwidth profile. A specific machine on the LAN can be
identified via IP address or MAC address, or the profile can apply to a LAN
port or VLAN group. As well a wireless network can be selected by its BSSID
for bandwidth shaping.
page. To have the profile apply to all services, select ANY.
40
Advanced > Firewall Settings >
User Manual