Event Log Viewer In Gui; Figure 83: Syslog Server Configuration For Remote Logging (Continued) - D-Link DSR-250N User Manual

Unified Services Router
the local Event Viewer on the router's GUI, and thus can collect a considerable
number of logs over a sustained period. This is typically very useful for debugging
network issues or to monitor router traffic over a long duration.
This router supports up to 8 concurrent S yslog servers. Each can be configured to
receive different log facility messages of varying sever ity. To enable a Syslog server
select the checkbox next to an empty Syslog server field and assign the IP address or
FQDN to the Name field. The selected facility and severity level messages will be
sent to the configured (and enabled) S yslog server once you save this configuration
page's settings.
Fig ure 83: Sys log server co nf ig urat io n fo r Rem ote Logg ing ( co nt inued )

9.4.3 Event Log Viewer in GUI

Status > Logs > View All Logs
The router GUI lets you observe configured log messages from the Status menu.
Whenever traffic through or to the router matches the settings determined in the
Tools > Log Settings > Logs Facility
Configuration
window with a timestamp.

It is very important to have accurate system time (manually set or from a NTP
server) in order to understand log messages.
Status > Logs > VPN Logs
This page displays IPsec VPN log messages as determined by the configuration
settings for facility and severity. This data is useful when evaluating IPsec VPN
traffic and tunnel health.
pages, the corresponding log message will be displayed in this
128
Tools > Log Settings > Logs
or
User Manual