D-Link DSR-250N User Manual page 185

Unified Services Router
Got
PNAC_EVENT_PREAUTH_SUCCESS
event for : %s
event for non-existent node %s
PNAC_EVENT_EAPOL_START event
received
PNAC_EVENT_EAPOL_LOGOFF event
received
PNAC_EVENT_REAUTH event received
PNAC_EVENT_AUTH_SUCCESS event
received
PNAC_EVENT_PORT_STATUS_CHAN
GED event received
unsupported event %d from PNAC
event for non-existent node %s. Create
new node.
Add new node to DOT11 Node list
Update dot11STA database
Add PMKSA to the list
eapolRecvAuthKeyMsg: received key
message
node not found
eapolRecvKeyMsg: replay counter not
incremented
eapolRecvKeyMsg: replay counter is not
same
processing pairwise key message 2
RSN IE matching: OK
processing pairwise key message 4
processing group key message 2
processing key request message from
client
WPA version %2x %2x not supported
(%s) group cipher %2x doesn't match
(%s)Pairwise cipher %s not supported
(%s) authentication method %d not
supported
%s:Auth method=%s pairwise cipher=%s
IE size=%d
WPA version %2x %2x not supported
Unable to obtain IE of type %d
PTK state changed from %s to %s
using PMKSA from cache
PTK GK state changed from %s to %s
GK state changed from %s to %s
Sending PTK Msg1
Sending PTK Msg3
Sending GTK Msg1
DEBUG UDP failed, received Length is %d
DEBUG umiIoctl(UMI_COMP_KDOT11,
umiIoctl(UMI_COMP_UDOT11,%d,%d
DEBUG ) \
umiIoctl(UMI_COMP_KDOT11,%d,%d
DEBUG ) \
DEBUG No IAPP Node found for req id %d
umiIoctl(UMI_COMP_UDOT11,%d,%d
DEBUG ) \
umiIoctl(UMI_COMP_KDOT11,%d,%d
DEBUG ) \
umiIoctl(UMI_COMP_UDOT11,%d,%d
DEBUG ) failed
DEBUG UDP socket is not created
DEBUG UDP send failed
DEBUG IAPP: socket (SOCK_STREAM) failed.
DEBUG IAPP: TCP connect failed to %s.
DEBUG cmd %d not supported.sender=%d
umiIoctl(UMI_COMP_KDOT11,%d,%d
DEBUG ) failed
IAPP-CACHE-NOTIFY-REQUEST
DEBUG send to
./src/dot11/iapp/iappLib.c:1314:
DEBUG ADP_ERROR (
DEBUG BSSID value passed is NULL
DEBUG reserved requestId is passed
DEBUG interface name is NULL
DEBUG IP address value passed is NULL
DEBUG opening receive UDP socket failed
enabling broadcast for UDP socket
DEBUG failed
opening receive TCP socket for new
DEBUG AP failed
./src/dot11/iapp/iappLib.c:1784:
DEBUG ADP_ERROR(
./src/dot11/iapp/iappLib.c:1794:
DEBUG ADP_ERROR(
./src/dot11/iapp/iappLib.c:1803:
DEBUG ADP_ERROR(
DEBUG failed created dot11dLock.
DEBUG failed initialize profile library.
DEBUG failed to create cipher contexts.
DEBUG unable to register to UMI
DEBUG could not create MIB tree
DEBUG unable to register to PNAC
Max registration attempts by DOT11 to
DEBUG PNAC exceeded
DEBUG Creation of EAP WPS Profile Failed
DEBUG umiIoctl(UMI_COMP_IAPP,%d ) failed
183
User Manual
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR