Unified Services Router
Fig ure 99: L ist of LAN hosts
10.3.4 Active VPN Tunnels
Status > Active VPNs
You can view and change the status (connect or drop) of the router's IPsec security
associations. Here, the active IPsec SAs (security associations) are listed along with
the traffic details and tunnel state. The traffic is a cumulative measure of
transmitted/received packets since the tunnel was established.
If a VPN policy state is ―IPsec SA Not Established‖, it can be enabled by clicking
the Connect button of the corresponding policy. The Active IPsec SAs table displays
a list of active IPsec SAs. Table fields are as follows.
Field
Policy Name
Endpoint
Tx (KB)
Tx (Packets)
State
Description
IKE or VPN policy associated with this SA.
IP address of the remote VPN gateway or client.
Kilobytes of data transmitted over this SA.
Number of IP packets transmitted over this SA.
Status of the SA for IKE policies: Not Connected or IPsec SA Established.
145
User Manual