D-Link DSR-250N User Manual page 190

Unified Services Router
phyPort:%s
pnacPortPaeDeconfig:kpnacPortPaeDec
onfig failed
pnacPortPaeDeconfig:kpnacPortPaeDec
onfig failed
pnacBackAuthSuccess: failed to notify
the destination "
could not initialize MGMT framework
umiInit failed
iappInit failed
could not initialize IAPP MGMT.
dot11Malloc failed
buffer length not specified
Invalid length(%d) specified
Failed to get information about
authorized AP list.
Recd IE data for non-existent AP %s
Recd IE data for wrong AP %s
Received Invalid IE data from WSC
Recd IE data for non-existent AP %s
Recd WSC Start command without
interface name
Recd WSC start for non-existent AP %s
Recd WSC start for wrong AP %s
Unable to send
WSC_WLAN_CMD_PORT to WSC
Failed to get the ap context for %s
WPS can only be applied to WPA/WPA2
security profiles
wpsEnable: running wsccmd failed
Failed to get the ap context for %s
WPS conf. under non WPA/WPA2
security setting
Failed to reset the Beacon Frame IE in
the driver
Failed to reset the Beacon Frame IE in
the driver
WPS method cannot be NULL
PIN value length should be a multiple of
4 !!
Failed to initiate PIN based association,
PIN = %s
pnacRadXlateRadPktIntegrityChk: no
corresponding "
Error from
pnacRadXlateRadPktIntegrityChk: no
WARN message "
Error from
WARN pnacRadXlateRadPktIntegrityChk: "
From
pnacRadXlateRadChalPktHandle: no
WARN encapsulated eap "
Error from
pnacRadXlateRadChalPktHandle:
ERROR malloc for eap "
Error from
pnacEapDemoSuppUserInfoRegister:
ERROR invalid "
Error from pnacEapDemoSuppRecv:
ERROR received null EAP pkt
Error from pnacEapDemoSuppRecv:
ERROR send ptr to pnac supplicant"
From pnacEapDemoSuppRecv: user
ERROR info not entered yet
Error from pnacEapDemoSuppRecv:
ERROR couldn't "
ERROR MDString: adpDigestInit for md5 failed
ERROR pnacUmiInit: UMI initialization failed
ERROR could not start PNAC task
ERROR invalid aruments
ERROR pnacIfNameToIndex failed
pnacPhyPortParamSet: device invalid
ERROR %s%d
pnacPhyPortParamSet: EIOCGADDR
ERROR ioctl failed
pnacPhyPortParamSet: multicast addr
ERROR add ioctl failed
pnacPhyPortParamUnset: multicast
ERROR addr del ioctl failed
ERROR pnacPDUXmit: Invalid arguments
ERROR pnacPDUXmit: failed to get M_BLK_ID
from pnacIsInterfaceUp: device %s%d
ERROR invalid
pnacRecvRtn: dropping received
ERROR packet as port is"
ERROR pnacSendRtn: Invalid arguments
pnacSendRtn: no physical port
ERROR corresponding to"
pnacSendRtn: dropping packet as
ERROR port"
pnacAuthBuildRC4KeyDesc:
ERROR adpEncryptInit(RC4) failed
pnacAuthBuildRC4KeyDesc:
ERROR adpCipherContextCtrl"
pnacDot11UserSet: incorrect buffer
ERROR length
ERROR PNAC user component id not set.
188
User Manual
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR