D-Link DSR-250N User Manual page 181

Unified Services Router
Enabling attack check for L2TP.
Enabling attack check for UDP Flood.
Enabling attack check for IPsec.
Enabling attack check for PPTP.
Enabling attack check for L2TP.
Enabling DoS attack check with %d
SyncFlood detect rate, "
Disabling DoS attack check having %d
SyncFlood detect rate,"
Enabling ICSA Notification Item for ICMP
notification.
Enabling ICSA Notification Item for
Fragmented Packets.
Enabling ICSA Notification Item for Multi
cast Packets.
Disabling ICSA Notification Item for
ICMP notification.
Disabling ICSA Notification Item for
Fragmented Packets.
Disabling ICSA Notification Item for Multi
cast Packets.
Adding IP/MAC binding rule for %s MAC
address "
Deleting IP/MAC binding rule for %s
MAC "
./src/firewall/linux/user/firewalld.c:60:#un
def ADP_DEBUG
./src/firewall/linux/user/firewalld.c:62:#def
ine ADP_DEBUG printf
Restarting traffic meter with %d mins,
%d hours, "
Updating traffic meter with %d mins, %d
hours, "
Deleting traffic meter.
Disabling block traffic for traffic meter.
Enabling traffic meter.
Adding lan group %s.
Deleting lan group %s.
Renaming lan group from %s to %s.
Deleting host %s from %s group.
Adding host %s to %s group.
Enabling Keyword blocking for %s
keyword.
Disabling keyword Blocking for %s
keyword .
Deleting trusted domain with keyword
%s.
Adding %s keyword to trusted domain.
Enabling Management Access from
DEBUG Updating BlockSites Keyword from \
DEBUG Inserting BlockSites Keyword \
DEBUG Deleting Trusted Domain \
DEBUG Adding Trusted Domain \
Restarting Schedule Based Firewall
DEBUG Rules
DEBUG Enabling Remote SNMP
DEBUG Disabling Remote SNMP
DEBUG Enabling Remote SNMP
DEBUG Disabling DOS Attacks
DEBUG Enabling DOS Attacks
DEBUG Enabling DOS Attacks
DEBUG Restarting Firewall [%d]:[%d] For %s
restartStatus = %d for LogicalIfName =
DEBUG %s
DEBUG Deleting Lan Group %s
DEBUG Adding Lan Group %s
DEBUG Deleting lan host %s from group %s
DEBUG Adding lan host %s from group %s
Disabling Firewall Rule for IGMP
DEBUG Protocol
Enabling Firewall Rule for IGMP
DEBUG Protocol
Deleting IP/MAC Bind Rule for MAC
DEBUG address %s and IP "
Adding IP/MAC Bind Rule for MAC
DEBUG address %s and IP
Deleting Protocol Bind Rule for Service
DEBUG %s
Deleting Protocol Bind Rule for Service
DEBUG %s
Deleting Protocol Bind Rule for Service
DEBUG %s
Adding Protocol Bind Rule for Service
DEBUG %s
DEBUG %s Session Settings
DEBUG Restarting IPv6 Firewall Rules...
Deleting Port Trigger Rule for
DEBUG %d:%d:%d:%d:%d
Deleting Port Trigger Rule for
DEBUG %d:%d:%d:%d:%d
Enabling Port Trigger Rule for
DEBUG %d:%d:%d:%d:%d
Disabling Port Trigger Rule for
DEBUG %d:%d:%d:%d:%d
DEBUG Enabling Port Trigger Rule for
179
User Manual
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG