D-Link DSR-250N User Manual page 197

Unified Services Router
%s: flow dst=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl6_dst, family)
%s: flow src=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl6_src, family)
a guy asks for address mask. Who is it?
icmp v4 hw csum failure)
expire>> %u %d %d %d, expire,
expire++ %u %d %d %d, expire,
rt_cache @%02x: %u.%u.%u.%u, hash,
rt_bind_peer(0) @%p,
NET_CALLER(iph)
ip_rt_advice: redirect to
ip_rt_bug: %u.%u.%u.%u ->
%u.%u.%u.%u, %s,
UDP: short packet: From
%u.%u.%u.%u:%u %d/%d to
%u.%u.%u.%u:%u,
UDP: bad checksum. From
%d.%d.%d.%d:%d to
%d.%d.%d.%d:%d ulen %d,
a guy asks for address mask. Who is it?
fib_add_ifaddr: bug: prim == NULL
fib_del_ifaddr: bug: prim == NULL
expire>> %u %d %d %d, expire,
expire++ %u %d %d %d, expire,
rt_cache @%02x: %u.%u.%u.%u, hash,
rt_bind_peer(0) @%p,
ip_rt_advice: redirect to
ip_rt_bug: %u.%u.%u.%u ->
%u.%u.%u.%u, %s,
%s: lookup policy [list] found=%s,
%s: called: [output START],
__FUNCTION__
%s: flow dst=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl4_dst, family)
%s: flow src=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl4_src, family)
%s: flow dst=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl6_dst, family)
%s: flow src=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl6_src, family)
a guy asks for address mask. Who is it?
icmp v4 hw csum failure)
expire>> %u %d %d %d, expire,
expire++ %u %d %d %d, expire,
rt_cache @%02x: %u.%u.%u.%u, hash,
rt_bind_peer(0) @%p,
NET_CALLER(iph)
ip_rt_advice: redirect to
DEBUG encrypt data length mismatch
DEBUG encrypt data does not compare
DEBUG tkip decap failed
DEBUG decrypt phase1 botch
DEBUG decrypt data does not compare
DEBUG decap botch; length mismatch
DEBUG decap botch; data does not compare
DEBUG tkip demic failed
DEBUG 802.11i TKIP test vectors passed
DEBUG %s, buf
Atheros HAL assertion failure: %s: line
DEBUG %u: %s,
ath_hal: logging to %s %s,
DEBUG ath_hal_logfile,
DEBUG ath_hal: logging disabled
DEBUG %s%s, sep, ath_hal_buildopts[i]
ath_pci: No devices found, driver not
DEBUG installed.
DEBUG _fmt, __VA_ARGS__
%s: Warning, using only %u entries in
DEBUG %u key cache,
DEBUG %s: TX99 support enabled, dev->name
%s:grppoll Buf allocation failed
DEBUG ,__func__
DEBUG %s: %s: unable to start recv logic,
DEBUG %s: %s: unable to start recv logic,
DEBUG %s: no skbuff, __func__
%s: hardware error; resetting, dev-
DEBUG >name
%s: rx FIFO overrun; resetting, dev-
DEBUG >name
%s: unable to reset hardware: '%s'
DEBUG (HAL status %u)
%s: unable to start recv logic, dev-
DEBUG >name
%s: %s: unable to reset hardware: '%s'
DEBUG (HAL status %u),
DEBUG %s: %s: unable to start recv logic,
DEBUG ath_mgtstart: discard, no xmit buf
%s: [%02u] %-7s , tag, ix, ciphers[hk-
DEBUG >kv_type]
DEBUG %02x, hk->kv_val[i]
DEBUG mac %s, ether_sprintf(mac)
DEBUG %s , sc->sc_splitmic ? mic : rxmic
DEBUG %02x, hk->kv_mic[i]
195
User Manual
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG