Firmware Window - Cisco 7000 Series Configuration Manual

Firmware Window

Table 6-3
Option
Import configuration to
camera
Firmware Window
The Firmware window lets you view information about the firmware that is installed on the IP camera
and upgrade the firmware.
Before you upgrade firmware, download the firmware file to a PC that is accessible on your network and
unzip the file if it is zipped. To download firmware, go to this web page:
http://www.cisco.com/en/US/products/ps6918/Products_Sub_Category_Home.html
After you upgrade firmware, the IP camera restarts automatically. It retains all configuration
information.
To display the Firmware window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Click Administration to expand the menu.
Step 2
From the Administration menu, click Firmware.
Step 3
The Firmware window appears. If you change any options in this window, you must click the Save
Settings button to save the changes. If you do not click this button, changes are not retained when you
exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.
Table 6-4
Cisco Video Surveillance 7000 Series IP Camera Configuration Guide, Release 1.1.4
6-6
Maintenance Window Options (continued)
Description
Path and folder where a configuration file is stored. You can click Browse to
find this location. After you enter this information, click Import to load the
configuration file to the IP camera.
After you upload a configuration file to the IP camera, the IP camera restarts
automatically.
If you upload configuration from another IP camera that is active in your
network, make sure to configure this IP camera with a name, description, and
unique IP address (if not obtained through DHCP). To change these options,
see the "Basic Window" section on page 5-1
Window" section on page
A configuration file that you upload includes the passwords that are
configured for the administrator and for users. If you change any passwords
after saving the configuration file, be aware that uploading the file overwrites
the new passwords with the saved ones.
describes the options in the Firmware window.
and the
5-3.
Chapter 6 Administration
"IP Addressing
OL-28694-01