Upgrading The Firmware - Cisco PVC300 - Small Business Pan Tilt Optical Zoom Internet Camera Network Administration Manual

Using the Setup Screen
Administering the PVC300
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
STEP 10
Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE

Upgrading the Firmware

This folder has only one section, Firmware Upgrade. This feature allows you to
upgrade the firmware on your PVC300 PTZ Internet Camera. It takes about five
minutes to complete the process. Do not power off the PVC300 PTZ Internet
Camera during the upgrade.
Follow the steps below to download new firmware:
Go to http://www.cisco.com/en/US/products/ps9944/prod_models_home.html.
Choose the Cisco PVC300 IP camera.
Under Support, click Download Software.
Select the firmware desired, such as Internet Camera Firmware.
Click on the latest release.
Click on the firmware file provided.
Read the instructions to download to your computer, and click Accept.
In the Firmware Upgrade section of the camera GUI, click the red Upgrade button.
Click browse and go to the location on your computer where you downloaded the
firmware.
Click the red Upgrade button.
The PVC300 PTZ Internet Camera reboots automatically when the upgrade
completes.
6
44