Ip Addressing Window - Cisco 7000 Series Configuration Manual

Chapter 5 Network Setup

IP Addressing Window

The IP Addressing window provides options for configuring the IP address of the IP camera.
To display the IP Addressing window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Click Network Setup to expand the menu.
Step 2
From the Network Setup menu, click IP Addressing.
Step 3
The IP Addressing window appears. If you change any options in this window, you must click the Save
Settings button to save the changes. If you do not click this button, changes are not retained when you
exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.
Table 5-2
Table 5-2
Option
IP Addressing Area
IP Version
Configuration Type
IP Address
Subnet Mask
Gateway Address
Primary DNS
OL-28694-01
describes the options in the IP Addressing window.
IP Addressing Window Options
Description
Choose the IP version from the pull-down list. Currently, only IPv4 is
supported.
Choose the method by which the IP camera obtains its IP address:
Dynamic—If your network includes a DHCP server for dynamic
•
allocation of IP addresses, choose this option if you want DHCP to
assign an IP address and subnet mask to the IP camera. Depending on
your router, the default gateway, primary DNS server, and secondary
DNS server may also be assigned. The DHCP server must be configured
to allocate static IP addresses based on MAC addresses so that the IP
camera always receives the same address.
• Static—Choose this option if you want to manually enter an IP address,
subnet mask, default gateway, and DNS server IP addresses for the
camera.
If you configured the IP camera for a static IP address, enter that IP address.
If you configured the IP camera for a static IP address, enter the subnet mask
for the IP camera. Use the same value that is configured for the PCs on your
network.
If you configured the IP camera for a static IP address, enter the gateway for
the IP camera. Use the same value that is configured for the PCs on your
network.
Optional. Enter the IP address of the primary the DNS server that is used in
your network. Use the same value that is used for the PCs on your network.
Typically, your ISP provides this address.
This address is required if you use a host name instead of an IP address in
any configuration field in the IP camera configuration windows.
Cisco Video Surveillance 7000 Series IP Camera Configuration Guide, Release 1.1.4
IP Addressing Window
5-3