Cisco 7000 Series Configuration Manual page 12

Understanding the IP Camera User Interface
Table 1-2
Field
Secondary DNS
IO Port Status
Input Port
Output Port
Stream 1 and Stream 2
User
IP Address
Start Time
Elapsed Time
Codec
Cisco Video Surveillance 7000 Series IP Camera Configuration Guide, Release 1.1.4
1-6
Home Window Information (continued)
Description
IP address of the secondary DNS server, if configured for the IP camera. To
configure a secondary DNS server, see the
on page 5-3.
Current state of the input port(s) on the IP camera. To configure an input
port, see the "IO Ports Window" section on page
Current state of output port(s) on the IP camera. To configure an output port,
see the "IO Ports Window" section on page
IP camera user name of each user who is accessing the primary video stream
(Stream 1) or the secondary video stream (Stream 2) through a client PC or
a third-party device.
Be default, users appear in order of start time. To displays users in ascending
order of any information in any corresponding column, click the column
heading. Click a column heading again to reverse the display order.
IP address of the client device.
Time and date that the client accessed the video stream for this session.
Length of time that the client has been accessing the video stream.
Video codec (H.264 or MJPEG) being used for the stream.
Chapter 1 Overview
"IP Addressing Window" section
4-10.
4-10.
OL-28694-01