Network Setup; Basic Window - Cisco 7000 Series Configuration Manual

Network Setup

The Network Setup windows let you configure various network-related settings for the IP camera.
The following sections describe the Network Setup windows in detail:
•
•
•
•
•
•

Basic Window

The Basic window provides options for identifying the IP camera and controlling basic operations.
To display the Basic window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Click Network Setup to expand the menu.
Step 2
From the Network Setup menu, click Basic.
Step 3
The Basic window appears. If you change any options in this window, you must click the Save Settings
button to save the changes. If you do not click this button, changes are not retained when you exit the
window. Save Settings appears at the bottom of the window. You may need to scroll down to it.
Table 5-1
OL-28694-01
Basic Window, page 5-1
IP Addressing Window, page 5-3
Time Window, page 5-4
Discovery Window, page 5-6
IP Filter Window, page 5-6
QoS Window, page 5-7
describes the options in the Basic window.
Cisco Video Surveillance 7000 Series IP Camera Configuration Guide, Release 1.1.4
5
C H A P T E R
5-1