Environmental; Connectors; Safety; Emc Compliance (Class B - ProCurve Wireless Access Point 10ag Installation And Configuration Manual

Hide thumbs Also See for Wireless Access Point 10ag:
Table of Contents

Advertisement

Specifications
A-2

Environmental

Operating
Temperature:
0°C to 40°C (32°F to 104°F) PoE mode -40°C to 70°C (-40°F to 158°F)
Relative humidity:
15% to 95%
(non-condensing)
Maximum altitude:
3.05 Km (10,000 ft)

Connectors

The 10/100 Mbps RJ-45 twisted-pair port is compatible with the
IEEE 802.3u 100Base-TX and IEEE 802.3 Type 10Base-T standards.
Note: To provide Power over Ethernet to the access point, all 4 pairs of
wires must be connected for any network cable attached to this port.

Safety

Complies with:
IEC 60950-1: 2001
EN 60950-1: 2002
UL 60950-1 1st Ed.
CAN/CSA-C22.2 No. 60950-1-03

EMC Compliance (Class B)

Complies with:
FCC Part 15.107 and 15.109
ICES-003 (Canada)
VCCI

Radio Signal Certification

Complies with:
FCC Part 15, Subpart C and E
RSS-210 (Canada), Issue 7 (June 2007)
EN300.328 v1.7.1 (2006-10)
EN 301.893 V1.2.3 (2003-08)
Non-Operating
10% to 90%

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wireless Access Point 10ag and is the answer not in the manual?

Questions and answers

Table of Contents