Tasks For Your First Web Browser Interface Session - ProCurve Wireless Access Point 10ag Installation And Configuration Manual

■
Tasks for Your First Web Browser
Interface Session
The first time you access the Web browser interface, there are a number of
basic tasks that you should perform.
specific instructions on the how perform the procedure, refer to the page
number listed in the right column.
In setting up your access point for network installation, this manual covers
many of the tasks that should be considered for proper security and manage-
ment. Each of these tasks are detailed in their respective sections, however,
this summary is provided as an aid for establishing your network.
Table 3-1.
To Learn How to Do This Task
Change the default password
Set the correct country/region code
Control access to the wireless network
Set wireless security from No Security (default) to at least WPA/
WPA2
The information pane: Shows related configuration options for each
item on the menu. For example, if you click IP Settings on the menu, the
information pane loads the parameters that you can set or edit, and then
save for your desired configuration change to take effect.
Basic Web Interface Tasks
Getting Started With Access Point Configuration

Tasks for Your First Web Browser Interface Session

Table 3-1 lists these essential tasks. For
Refer to
"Changing the Management Password"
"Configuring Basic Settings"
"Controlling Access to the Wireless Network"
page 4-22
"Configuring Security Settings"
on page 5-3
on page 4-1
on
on page 4-7
3-5