Configuring Wireless Settings - ProCurve Wireless Access Point 10ag Installation And Configuration Manual

N o t e s
3. In Country/Region, select the country or region where you are installing
the access point (if you have not done so earlier).
You must select the correct country/region for the location in which you
■
operate the access point, so that it uses only the authorized radio channels
for wireless network devices.
The radios are disabled if the Country/Region option is not set. Once this
■
option is configured, the radios can be enabled.
■ When resetting to factory defaults, the Access Point 10ag must have its
Country/Region setting configured.
4. Click Apply.

Configuring Wireless Settings

Wireless settings define the SSID, wireless channel, wireless mode, and data
rate that each wireless interface uses. The access point comes with one
predefined wireless profile (SSID wireless-g), which allows
802.11b/g wireless clients to associate with it. You can edit this existing
wireless profile, or you can create new ones.
Setting Up the Access Point
Configuring Wireless Settings
4-3