Table of Contents
Advertisement
Installing the Switch
Installation Procedures
2.
Power and
Fault LEDs
Test LED
Power and
Fault LEDs
Test LED
Power and
Test LED
Fault LEDs
Figure 2-6. LEDs on the yl switches.
2-12
Check the LEDs on the switch as described below.
Switch port LEDs
*
Switch port LEDs
When the switch is powered on, it performs its diagnostic self test. Self
test takes approximately 50 seconds to complete.
ProCurve Switch 3500yl-24G
ProCurve Switch 3500yl-48G
ProCurve Switch 6200yl-24G
Switch port LEDs
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
