Front Of The Switch - HP ProCurve Series Installation And Getting Started Manual

Front of the Switch

PoE, Temp, Fan, and
Power,
Test Status LEDs
Fault, and
Locator
LEDs
Module, EPS, and
RPS, Status LEDs
*
Console port*
Reset and Clear
buttons
Port LED Mode select
button and indicator LEDs
*On the 3500yl-48G switch, the Console and Auxiliary ports are located on the back of the unit.
Figure 1-1. Front of the ProCurve Switch 3500yl-24G.
PoE, Temp, Fan, and
Power,
Test Status LEDs
Fault, and
Locator
LEDs
Module, EPS, and
RPS, Status LEDs
Port LED Mode select
Reset and Clear
button and indicator LEDs
buttons
Figure 1-2. Front of the ProCurve Switch 3500yl-48G.
Auxiliary port
Switch port LEDs
and LED*
10/100/1000Base-T RJ-45
10/100Base-TX RJ-45 ports*
Introducing the Switch
Front of the Switch
Dual-personality ports
(1000Base-T* or mini-GBIC)
Switch port LEDs
Dual-personality ports
(1000Base-T* or mini-GBIC)
1-3