Getting Started; How To Attach The Stylus; Installing The Rechargeable Battery Packs - VTech Innotab 3S User Manual

Wi-fi learning tablet

Hide thumbs Also See for Innotab 3S:

Table of Contents

Battery Door Lock Sliding

Switches

microSD Memory Card Slot

Battery Compartments

Tie one end of the stylus string to the stylus and the other end to the stylus

fastener on the InnoTab

Battery Installation

• Make sure the tablet is turned off.

• Locate the battery door lock sliding switch on the back

of the tablet. Slide the switch to open the battery covers,

then remove the covers.

• Insert 4 AA batteries as shown in image 2.

• Make sure to replace the battery covers.

1. Make sure the InnoTab

2. Turn the unit over. Slide the battery door lock switches forward and push

the battery covers off to each side to remove them.

Slide these switches to open the battery doors.

Always replace the InnoTab

after changing batteries.

Insert a microSD memory card (not included).

(NOTE: InnoTab

microSD memory cards up to 32GB.)

Insert 4 AA batteries (not included) or the

rechargeable battery packs. For battery installation

instructions, please see the section below.

3S.

(For 4 AA batteries)

3S is turned off.

3S battery doors

3S is compatible with

Table of Contents

Show Quick Links

Table of Contents