VTech Innotab 3S User Manual page 14

• Turn on your InnoTab
• Locate the USB port on your InnoTab
• Insert the smaller end of the included USB cable into the USB port on your
InnoTab 3S.
®
• the larger end of the USB cable into a USB port on your computer.
Insert
The USB port is usually marked with the symbol that appears on the USB
port cover of your InnoTab
• When the connection is successful your InnoTab
will show a Connected to Computer screen (image 3).
• The Learning Lodge™ Setup Program will automatically
launch. Follow the prompts on-screen to complete the
installation.
• For help using Learning Lodge™ refer to the Help
section of the program.
Other Learning Lodge™ Installation Methods
If the Setup Program fails to launch when you connect the
InnoTab 3S to your computer, you can also install Learning Lodge™ through
®
one of the following methods.
• CD Installation (for PC Computers)
- Insert the Learning Lodge™ CD into the CD-ROM drive.
- Wait for the installation screen to come up. If the installation screen does
not come up automatically, go to My Computer and then right click on the
CD-ROM drive. From the drop-down menu, choose Explore and double
click the VTech_Toy_Setup.exe icon to start it up manually.
InnoTab
- Select the
screen.
10
3S.
®
®
3S. Please refer to images 1 & 2 below.
®
1
3S
®
version of Learning Lodge™ on the installation
3S and open the rubber port cover.
3S
®
3
2