VTech Innotab 3S User Manual page 36

The battery charging
indicator light does not
come on.
The green light blinks
very quickly when
attempting to charge
the unit.
If your InnoTab 3S does not respond to an inserted cartridge, please carefully
®
try the following:
• Remove all batteries and unplug all wiring.
• Use a cotton swab dipped in rubbing alcohol or an alcohol-based window
cleaner to gently clean the contact area of the cartridge slot.
• If necessary, dry all the clean contact areas with a soft, lint-free cloth.
• Please make sure that all parts are completely dry before restoring electricity.
Static electricity may cause the InnoTab
the game play score stored in the tablet memory may be lost. In cases where
InnoTab 3S is malfunctioning due to static electricity, reset the tablet by
®
removing and reinstalling the batteries, or by unplugging and replugging
the AC adaptor. Or, if the static electricity malfunction occurred during the
downloading process, disconnect the USB cable, delete the corrupted file,
and reset the tablet as described above. Then reconnect the USB cable and
restart the download process.
For more information and troubleshooting tips, visit
www.vtechuk.com/Customer-Support/
32
The AC Adaptor
is not properly
connected, or the
tablet has been
left on.
The rechargeable
batteries are not
able to charge
properly.
Inspect the AC Adaptor. Make
sure that the Adaptor is securely
connected to the InnoTab and
plugged in to the wall outlet.
Make sure the tablet is turned off.
Check that the rechargeable
batteries are correctly installed in
the tablet.
Make sure the connector pins
on the InnoTab
contacts on the battery packs are
clean and free of debris.
If the problem persists after
checking the above, unplug the
AC Adaptor from the AC Adaptor
jack. Wait for 10 seconds before
plugging the AC Adaptor back in.
3S to malfunction. In some cases,
®
and the metal
®