How To Play - VTech Innotab 3S User Manual

The chemical symbols Hg, Cd or Pb, where marked, indicate that
the battery contains more than the specified value of mercury (Hg),
cadmium (Cd) or lead (Pb) set out in Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on the market
after 13th August, 2005.
Help protect the environment by disposing of your product or batteries
responsibly.
For more information, please visit: www.recycle-more.co.uk;
www.recyclenow.com.
NOTE: When InnoTab
you may see this icon appear on the
screen . This indicates that battery power
is low, and you should replace or recharge the
batteries soon. Battery time remaining once the
icon first appears is approximately 10-30 minutes,
depending on the type of batteries in use. After that, InnoTab
very low battery screen for 3 seconds and then will turn off automatically.
To preserve battery life, InnoTab
is no input for a few minutes. Wi-Fi connection will be disconnected when the
battery power is low.
Standard guidelines for adaptor toys and electrically operated products
• As with all electrical products, precautions should be used and observed during
handling and use to prevent electric shock.
• Do not leave the toy plugged in for extended periods of time.
• The toy must only be used with a transformer for toys.
• Never clean a plugged in toy with liquid.
• Never use more than one adaptor.
• The external flexible cord of this transformer cannot be replaced; if the cord is
damaged, the transformer should be scrapped.
• The toy is only to be connected to Class II equipment bearing the following
symbol ).

How to Play

STEP 1: Turn InnoTab
Turn InnoTab 3S on by holding down the Power button for a few seconds. A VTech
®
logo and an InnoTab
seconds.
3S is running on batteries,
®
3S will shut down automatically when there
®
3S On
®
3S logo will appear and remain onscreen for a few
®
3S will show the
®
®
7