Getting Started; How To Attach The Stylus; Installing The Rechargeable Battery Packs - VTech InnoTab3 User Manual

Case: 1:15-cv-10889 Document #: 73-1 Filed: 05/18/16 Page 8 of 41 PageID #:925
Battery Door Lock Sliding
Switch
microSD Card Slot
Battery Compartments

How to Attach the Stylus

Tie one end of the stylus string to the stylus and the other end to the stylus
fastener on the InnoTab

Installing the Rechargeable Battery Packs

1. Make sure the InnoTab
2. Turn the unit over. Slide the battery door lock switch forward and push
the battery covers off to each side to remove them.
3. Insert Battery Pack
Pack into the compartment on the left side.
Slide this switch to open the battery doors.
Always replace the InnoTab
after changing batteries.
Insert a microSD memory card (not included).
(NOTE: InnoTab
memory cards up to 32GB.)
Insert 4 "AA" batteries (not included) or the
rechargeable battery packs. For battery
installation instructions, please see the section
below.
® 3.
® 3 is turned off.
into the compartment on the right side and Battery
® 3 battery doors
®
3 is compatible with microSD
4 4