Table of Contents
Advertisement
3.3.1
Self Test Function
The purpose of this test is to confirm the communication from host PC
to the ADAM-4577. If there is still an error, you can check the commu-
nication from the ADAM-4577 to the serial devices. If the test is
selected, an external test will be done to check that the connection
signals for each port are working properly. For the test, you will need
to connect each port to a loopback tester (provided in the package).
The loopback test only applies to RS-232 mode.
1. Key-in the IP address and TCP port of the device that you want to
connect. Select which port you want connect.
2. Click "connect" button
Chapter 3 Installation and Configuration
41
Advertisement
Table of Contents
